Clips, bows and hooks

Butterflyclip is a new clip for quickly attaching plantations to bamboostick. The shape of the bambooclip is compact, making ??it almost invisible to your product.   1VC055 5.5 mm 80,000 51x33x42 21 120×100 1VC08 8 mm 50,000 51x33x42 21 120×100 1VC10 10 mm 45,000 51x33x42 21 120×100  

It is used to attach a plant or bush to a horizontal wire. Self-clamping if tightened on the wire.   6BB11 8,250 60x40x33 30 120×100 11 mm  

Fixes bamboo or tonka canes at regular distances. It can be used with thick and thin bamboo or tonka sticks. Polar triangle in 15 cm and 9 cm.   6SDH- 400 60x40x33 30 120×100 6SDH- 600 60x40x33 30 120×100  

  6PC n.n.b. 60x40x33 30 120×100  

The orchid clip is a new product for quickly and pleasantly joining a (bamboo) stake and plant together. The clip connects the fuel and the plant to ensure that the plant is supported and protected from damage during shipping and transportation. The orchid clip has a variable diameter of 4.5 to 7 mm.   1OK06 […]

Label support ensures optimal label presentation. With an easy click system, the label post can be placed on the edge of the pot, creating a stable connection. With a flexible knob on the label, the label can be placed easily and quickly. Lifting the device can be done using the round handle on top of […]

Flexible label clips are used to easily attach the label to the (bamboo) burner. Using a label clip is a quick and inexpensive way to attach a label to a stake. The diameter is in line with the most commonly used diameter of bamboo poles.   6EC 30,000 60x40x33 25 120×100  

Flexible label clips are used to easily attach the label to the (bamboo) burner. Using a label clip is a quick and inexpensive way to attach a label to a stake. The diameter is in line with the most commonly used diameter of bamboo poles.   1ECXS 60,000 49x30x32 42 120×100  

Klamer Quattro is used for growing vines in mostly square containers. In each corner of the container is a bamboo stake, when the plant reaches its maximum height, the Quattro clip will be placed on the four bamboo poles that hold them together. For optimal presentation, the clip is equipped with a label support. The […]

The twister was created to accommodate more stakes together, especially for plants grown in a pyramid shape. Due to the design of the twist lock, installation can be done quickly and easily. When used in fruit tree production, single trunk and bamboo pile packing is also possible. An added advantage of the twister is that […]

The ratchet tree fastener is designed to tie the stem of a tree or plant quickly and easily together with a bamboo stake. An additional option is to place the label on the clip for optimal presentation.   6BK 3,000 60x40x33 30 120×100  

Plant clamps small middle and large are developed to connect the trunk of a stem or tree together. Due to the product’s ratcheting closure, this product has two main advantages. It can be used for a variety of diameters, which guarantees a perfect connection, and the other advantage is that it saves labor compared to […]

The 8.5 cm long fruit clip is used to attach a plant or bush to a horizontal wire. Ideal for very delicate plants.   6FK85 8,000 42x38x33 30 120×100 8.5 cm  

The label clip is being developed together with professional growers to follow market trends. The latest trend is to have a large photo label on each plant. Due to the fact that some plants do not bloom at the time of delivery, optimal presentation with a large photo label is very important and will help […]

Bato Clip rings are used to fix potted plants, small vegetable plants and small trees on a stick or other substrate. The clamping rings are made of highly flexible polypropylene to ensure quick placement and easy locking. Since the contact surfaces of the fingers are extra wide, better grip is achieved, avoiding pain and damage […]

It is used to attach the irrigation hose to the side of the gutter. The hook has an additional hook, so you can also hang an IV. The hook is available for a variety of gutters and irrigation hoses. Gutter hose holder 2 sizes: ? 25 mm x 80 mm and ? 23 mm x […]

Using a Bato String tensioner, damage to plants or fruit is history. The problem of coiling wires or hanging plants in rows can be easily solved with the Bato String tensioner. It can be applied easily and quickly, and saves a lot of time. The Bato String tensioner is made of black biodegradable material. The […]

Zucchini hook 28 mm ? It is used to fix the mandrel to the wire. Prevents the trunk from growing out of the wire. Easy attachment and removal thanks to the handle.   6CH 4,500 60x40x33 30 120×100  

In tomato production, Bato spools are hung on a horizontal grain drier. Tomato plants can be lowered with a flick of the wrist, without lifting the total weight of the plant. The spools can be supplied with or without string. The spools are wound at the factory with the required length of string of the […]

Bato Tophooks are used in vegetable production to provide flexible guidance for branches and stems along a horizontal wire. Pinching and breaking are eliminated, which means higher fruit yield and quality. With a convenient tap, the hook easily swings out to help the branch or stem slip in. Each Tophook can lead several branches or […]

18 mm quick hitch ? It is used to attach the mandrel to the wire between the clips. Prevents the stem from growing out of the wire cheap purchase and economical to use. Clamping hook with a diameter of 19 mm It is used to attach the mandrel to the wire between the clips. Prevents […]

Bato Truss brackets are used to support the first trusses. The quality of these trusses is always a problem due to snagging. The truss support is attached to the truss stem, providing support and ensuring better fruit quality and increased production. HMR 5.5mm and 6mm truss supports have open designs, making them suitable for the […]

The stem support is applied to grafted and tomato-covered tomatoes and prevents the plant from tearing, thus reducing the risk of Fusarium and Botrytis infections. The stem support is easy to use: place it before lowering the crop for the first time. It then remains in place for at least the next two times yields […]

The hook on the Bato Sides is used to attach the side shoots to the main stem. The Bato side hook ensures easy and efficient operation and prevents the side shoot from breaking off from the main leg.   [tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Dimensions[/tabtext] [/tabcontainer] [tabcontent] [tab] 6DFHK 5,000 60x40x48.5 20 120×100 12 cm [/tab] […]

Bato Stemhook 12 cm is used by tomato growers to support trusses mainly during autumn cultivation, when the stems are shorter. The new design of the hooks ensures optimum grip of the string. One of the hooks must be pulled behind the string, and the other side must be pulled behind the first or second […]

Bato Stemhook 10 cm is used by tomato growers to support trusses mainly during autumn cultivation, when the stems are shorter. The new design of the hooks ensures optimum grip of the string. One of the hooks must be pulled behind the string, and the other side must be pulled behind the first or second […]

Bato Truss brackets are used to support the first trusses. The quality of these trusses is always a problem due to snagging. The truss support is attached to the truss stem, providing support and ensuring better fruit quality and increased production. Hook model The lattice bracket is attached with hooks at the end of the […]

Bato Truss brackets are used to support the first trusses. The quality of these trusses is always a problem due to snagging. The truss support is fastened around the truss stem, supporting the supports and ensuring better fruit quality and increased production. U 6 mm model is pressed against the mandrel and provides good support […]

Bato Truss brackets are used to support the first trusses. The quality of these trusses is always a problem due to snagging. The truss support is attached to the truss stem, providing support and ensuring better fruit quality and increased production. The 6 mm U-flex model can be moved over the stem, but due to […]

Flexible short and wide support for long and thick trusses. Include at an early stage of growth. It can be bent during attachment, so the pin does not have to be pressed through the support. Bend as the truss stem grows.   [tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Dimensions[/tabtext] [/tabcontainer] [tabcontent] [tab] 6TB1002 22,000 60x40x35 30 120×100 […]

Flexible long and wide truss support for thick trusses. You can still join at a late stage of growth. It can be bent during attachment, so the pin does not have to be pressed through the support. Bend as the truss stem grows.   [tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Dimensions[/tabtext] [/tabcontainer] [tabcontent] [tab] 6TB1000 16,000 60x40x35 […]

Bato Truss brackets are used to support the first trusses. The quality of these trusses is always a problem due to snagging. The truss support is attached to the truss stem, providing support and ensuring better fruit quality and increased production. TheSuperflex can be pushed by the stem, but it is its flexibility that allows […]

This clip combines high quality and a competitive price. Because of its unique design, the open clip 23 weighs less than a traditional clip, but still provides excellence in stem steering for tomato production. The 23mm open clamp does not restrict the growth of the plant and there is less chance of getting diseases in […]

Strong, sturdy clip. Smooth finish inside and out to prevent damage to the plant. Features a lightweight, self-centering locking mechanism   6CL19 19 mm 10,000 60x40x56 20 120×100  

The open clip provides the best guidance for plants in tomato production. Using Bato’s open clip, you no longer need to rotate plant stems along the string with the possibility of damaging the plant. A certified biodegradable version of the Bato open Clip 22 is also available. Special colors and packaging on request.   [tabs […]